How buckling of the fuselage skin can be delayed ?
How buckling of the fuselage skin can be delayed ?
Buckling of the fuselage skin can be delayed by increasing the internal pressure.It can also be prevented by placing the stiffeners closer.
©2024 aerospaceanswers.com
Terms & Privacy
Terms & Privacy
-
LATEST QUESTIONS
-
Consider an airplane in an accelerated climb. At a given instant in this climb, the specific excess power is 120 ft/s
-
Consider an airplane flying at 620 mi/h at 35,000 ft. Calculate its energy height.
-
For a turbojet-powered airplane with the altitude variation of thrust given by Eq. (3.19), show that as the altitude increases, the maximum velocity decreases.
-
The BD-5J is equipped with plain flaps. The airfoil section at the wing root is an NACA 64-212, and interestingly enough, it has a thicker section at the tip, an NACA 64-218.
-
For the BD-5J, calculate (a) The maximum value of CL/CD (b) The maximum value of CL^(1/ 2) /CD
-
-
RELATED QUESTIONS
-
Consider an incompressible two-dimensional viscous flow over a curved surface. Let the pressure distribution on the surface be \(p(s)=2+sin\left ( \frac{\pi}{2}+s \right )\;N/m^2\),where \(s\) is the distance along the curved surface from the leading edge. Find the distance from where the flow separates.
-
All the factors remaining constant, if the weight of an aircraft increases by \(30 \%\) then the take off distance will increase by approximately.
-
Consider a steady two-dimensional zero pressure gradient laminar flow of air over a flat plate as shown below. Find the ratio of displacement thickness to momentum thickness of the boundary layer at a distance of 2m from the leading edge.
-
Find the shock angle and the total temperature at point P.
-