What are the roles of ailerons and flaps in an aircraft?

What are the roles of ailerons and flaps in an aircraft?

Kumar59 Asked on 7th September 2021 in Flight mechanics.
Add Comment
  • 1 Answer(s)

    Ailerons are one of the three basic controls on an airplane which are designed and used to change and control the moment. Ailerons can be deflected back and forth by pilot. Ailerons are mounted at trailing edge near the wing tips.

    Deflection of ailerons changes the lift and moment of the wing. When one aileron is deflected up and the other aileron is deflected down, there is a creation of differential lifting force on the wings, generating a rolling moment.

    This is also called lateral control, ailerons control roll.

    The function of ailerons or other conventional control surfaces like elevators and rudder is to change one equilibrium position of the airplane to another and to produce nonequilibrium accelerated motions like maneuvers.

    Ailerons are used to bank the aircraft by moving one wing tip up and other wing tip down. A downward deflection of aileron increases the lift. An upward deflection of aileron decreases the lift.

    Flaps and ailerons in an aircraftFlaps and ailerons in an aircraft

    Flaps are a mechanism to generate high lift. The lowest speed at which an aircraft can fly in a straight and level flight is called the stalling speed.

    In order to minimize stalling speed, coefficient of lift should be maximized, and at stalling speed there is maximum coefficient of lift.

    A wing with a given airfoil shape, maximum coefficient of lift is fixed.

    Lift produced by an airfoil depends on the physics of flow over the airfoil. Flaps, which are located at trailing edge of wing are used to increase the lift. When flaps are deflected downward, there is an increase in the camber of the airfoil with an increase in maximum coefficient of lift of the wing.

    If the flaps are designed to translate rearward so that effective wing area is increased along with rotating downward, \(C_{L,\,max}\) can be increased by a factor of \(2\).

    An aircraft has lowest flight velocities during take off and landing and flaps play critical role. During take off, flaps are set downward at a moderate setting, to have a high lift and low drag. During landing flaps and slats are deployed fully, so that there is a high lift and high drag.

    Slats are moving parts  which are present at the leading edge of the wing.

    Kisan Kumar Answered on 14th September 2021.
    Add Comment
  • Your Answer

    By posting your answer, you agree to the privacy policy and terms of service.