heat and mass transfer Archives - Aerospace answers

Question Tag: heat and mass transfer

All Questions

Filter by

Questions Per Page:

Two large diffuse gray parallel plates, separated by a small distance, have surface temperature of 400 K and 300 K. If the emmissivities of the surface are 0.8 and the Stefan-Boltzmann constant is 5.67 x 10^-8 W/m3K4, What is the net radiation heat exchange rate in KW/m3 between the two plates?
Two large diffuse gray parallel plates, separated by a small distance, have surface temperature of 400 K and 300 K. …
fluids

heat and mass transfer

Mech_59 Asked on 16th October 2023 in Mechanical engineering.
- 472 views
- 1 answers
- 0 votes
Two concentric spheres of diameters D1 = 0.5 m and D2 = 1 m are separated by an air space as shown in given figure and have surface temperatures of 400 K and 300 K respectively.
Two concentric spheres of diameters D1 = 0.5 m and D2 = 1 m are separated by an air space …
fluids

heat and mass transfer

Mech_59 Asked on 13th October 2023 in Mechanical engineering.
- 477 views
- 1 answers
- 0 votes
Consider a hot, boiled egg in a spacecraft that is filled with air at atmospheric presssure and temperature at all times.
Consider a hot, boiled egg in a spacecraft that is filled with air at atmospheric presssure and temperature at all …
fluids

heat and mass transfer

Mech_59 Asked on 13th October 2023 in Mechanical engineering.
- 475 views
- 1 answers
- 0 votes
Air at 27°C and 1 atm flows over a flat plate at velocity of 2 m/s. Assume that the plate is heated over its entire lenght to a temperature of 60°C.
Air at 27°C and 1 atm flows over a flat plate at velocity of 2 m/s. Assume that the plate …
fluids

heat and mass transfer

Mech_59 Asked on 12th October 2023 in Mechanical engineering.
- 458 views
- 1 answers
- 0 votes
A fluid flowing over a flat plate has the following properties : dynamic viscosity = 25 x 10^-6 kg/ms, specific heat = 2.0 kJ/kgK, thermal conductivity 0.05 W/mK.
A fluid flowing over a flat plate has the following properties : dynamic viscosity = 25 x 10^-6 kg/ms, specific …
fluids

heat and mass transfer

Mech_59 Asked on 12th October 2023 in Mechanical engineering.
- 458 views
- 1 answers
- 0 votes
An aluminium sphere weighning 5.5 kg and initially at a temperature of 290°C is suddenly immersed in a fluid at 15°C. The convective heat transfer coefficient is 58 W/m²K.
An aluminium sphere weighning 5.5 kg and initially at a temperature of 290°C is suddenly immersed in a fluid at …
fluids

heat and mass transfer

Mech_59 Asked on 29th September 2023 in Mechanical engineering.
- 858 views
- 1 answers
- 0 votes
A metallic rod (k = 32 W/m°C), 10 mm in diameter and 80 mm long, with an insulated end is to be used as spine. It is expossed to sourrounding with a temperature of 80°C and a heat transfer coefficient 55 W/m²°C.
A metallic rod (k = 32 W/m°C), 10 mm in diameter and 80 mm long, with an insulated end is …
fluids

heat and mass transfer

Mech_59 Asked on 29th September 2023 in Mechanical engineering.
- 431 views
- 1 answers
- 0 votes
What is the efficciency of a plate fin of length L = 1.5 cm and thickness 2 mm, (if k = 210 W/m-K, h = 285 W/m²k).
What is the efficciency of a plate fin of length L = 1.5 cm and thickness 2 mm, (if k …
fluids

heat and mass transfer

Mech_59 Asked on 28th September 2023 in Mechanical engineering.
- 1K views
- 1 answers
- 0 votes
It is required to heat oil to about 500°C for quenching purpose. A ladder is used in the furnace. The section of ladder is (10 x 20) mm². The sourroundings are at 27°C.
It is required to heat oil to about 500°C for quenching purpose. A ladder is used in the furnace. The …
fluids

heat and mass transfer

Mech_59 Asked on 28th September 2023 in Mechanical engineering.
- 2K views
- 1 answers
- 0 votes
A fin has 5 mm diameter and 100 mm length. The thermal conductivity of fin material is 400 Wm^-1K^-1.
A fin has 5 mm diameter and 100 mm length. The thermal conductivity of fin material is 400 Wm^-1K^-1. One …
fluids

heat and mass transfer

Mech_59 Asked on 28th September 2023 in Mechanical engineering.
- 1K views
- 1 answers
- 0 votes

1
2
…
4
>