incompressible flow Archives - Aerospace answers

Question Tag: incompressible flow

All Questions

Filter by

Questions Per Page:

Investigate the principles of aerodynamics in mechanical engineering, covering topics such as fluid flow around objects, lift and drag forces, and boundary layer phenomena.
Investigate the principles of aerodynamics in mechanical engineering, covering topics such as fluid flow around objects, lift and drag forces, …
Aircraft performance

incompressible flow

lift and drag

mech.

Worldtech Asked on 1st December 2024 in Mechanical engineering.
- 91 views
- 1 answers
- 0 votes
A circular cylinder and a sphere are in a free stream flow with their axis perpendicular to the flow. At the top of the sphere there is a pressure tap which is connected by a tube to one side of a manometer. There is a pressure tap on the surface of the cylinder which is connected to the other side of the manometer. Find the location of this tap on cylindrical surface such that there is no deflection of fluid in the manometer.
A circular cylinder and a sphere are in a free stream flow with their axis perpendicular to the flow. At …
fluids

incompressible flow

Kisan Kumar Asked on 1st September 2021 in Aerodynamics.
- 1K views
- 1 answers
- 0 votes
A pitot tube of an airplane which is flying at an standard sea level measures a pressure of \(1.09 \times 10^{5} N/m^{2}\). Find the velocity of the airplane.
A pitot tube of an airplane which is flying at an standard sea level measures a pressure of \(1.09 \times …
airspeed

incompressible flow

techAir Asked on 16th June 2021 in Aerodynamics.
- 1K views
- 1 answers
- 0 votes
Find the velocity of air in the test section of a low speed open circuit subsonic wind tunnel which has an inlet -to-throat area ratio of \(10\). The U-tube mercury manometer read as a height difference of \(10.5\,cm\) for the pressure difference between the inlet and the test section of the wind tunnel.
Find the velocity of air in the test section of a low speed open circuit subsonic wind tunnel which has …
airspeed

incompressible flow

Kisan Kumar Asked on 15th June 2021 in Aeronautics.
- 1K views
- 1 answers
- 0 votes
Find the velocity of an airplane flying at a standard sea level, if the static pressure at the throat of venturi is \(100 000 N/m^{2}\).
Find the velocity of an airplane flying at a standard sea level, if the static pressure at the throat of …
airspeed

incompressible flow

Kumar59 Asked on 15th June 2021 in Aerodynamics.
- 1K views
- 1 answers
- 0 votes
Bernoulli’s Principle and Equation:
What is Bernoulli’s theorem?
Boundary layer

fluids

incompressible flow

lift

streamlines

techAir Asked on 8th December 2020 in Fluid dynamics.
- 1K views
- 1 answers
- 0 votes
Consider an incompressible two-dimensional viscous flow over a curved surface. Let the pressure distribution on the surface be \(p(s)=2+sin\left ( \frac{\pi}{2}+s \right )\;N/m^2\),where \(s\) is the distance along the curved surface from the leading edge. Find the distance from where the flow separates.
Consider an incompressible two-dimensional viscous flow over a curved surface. Let the pressure distribution on the surface be \(p(s)=2+sin\left ( …
GATE

incompressible flow

Kisan Kumar Asked on 30th December 2019 in Aerodynamics.
- 1K views
- 1 answers
- 0 votes
The measured lift slope for the NACA \(23012\) airfoil is \(0.1080\; degree^{−1}\), and \(α_{L}=0 = −1.3^{\circ}\). Consider a finite wing using this airfoil, with AR = \(8\) and taper ratio = \(0.8\). Assume that \(δ = τ\) . Calculate the lift and induced drag coefficients for this wing at a geometric angle of attack = \(7^{\circ}\).
The measured lift slope for the NACA \(23012\) airfoil is \(0.1080\; degree^{−1}\), and \(α_{L}=0 = −1.3^{\circ}\). Consider a finite wing …
airfoil

Airplane design

incompressible flow

Worldtech Asked on 12th November 2019 in Flight mechanics.
- 3K views
- 1 answers
- 0 votes
Using thin airfoil theory, calculate \( (a) α_{ L=0}\) (b) \(cl\) when \(α = 3^{\circ} \).
The NACA 4412 airfoil has a mean camber line given by\[\frac{z}{c} = \left\{ {\begin{array}{*{20}{c}} {0.25\left[ {0.8\frac{x}{c} – {{\left( {\frac{x}{c}} \right)}^2}} …
airfoil

Airplane design

incompressible flow

Worldtech Asked on 11th November 2019 in Aerodynamics.
- 4K views
- 1 answers
- 0 votes
For the NACA \(2412\) airfoil, the lift coefficient and moment coefficient about the quarter-chord at \(−6 ^{\circ}\) angle of attack are \(−0.39\) and \(−0.045\),respectively. At \(4^{\circ}\) angle of attack, these coefficients are \(0.65\) and \(−0.037\),respectively. Calculate the location of the aerodynamic center.
For the NACA \(2412\) airfoil, the lift coefficient and moment coefficient about the quarter-chord at \(−6 ^{\circ}\) angle of attack …
aerodynamic center

airfoil

incompressible flow

Worldtech Asked on 10th November 2019 in Aerodynamics.
- 2K views
- 1 answers
- 0 votes

Tags

LATEST QUESTIONS

Tags